User-added image
To Change Preprogrammed Sensors
A)  Press MENU on the Console
B)  Scroll to Security Setup and press SELECT
C)  Enter Master Code*
D)  Scroll to Sensors and press SELECT
E)  Select Sensor to be modified
 
To Edit Sensor Name (Optional):
-  Press DELETE to remove default name
-  Using keys on Console keypad, type in desired name
-  Press OK when complete
 
To Select Sensor Placement:
-  Door – has entry delay of 30 seconds and exit delay of 60 seconds
- Window – has entry delay of 0 seconds and no exit delay
-  Press OK
 
To Select Alarm Type:
-  Select one of the following Alarm Types:
-  Stay & Away: When system is armed in this mode, Sensors will be armed
-  Away Only: When system is armed in this mode, only these Sensors will be armed
-  Convenience: When system is armed in this mode, no alarm event to monitoring station will be triggered (can be used for cabinets or drawers that do not require emergency assistance when opened)
-  Press OK
 
To Set Entry Delay:
-  You can set entry delay to any of the following:
-  30 seconds, 45 seconds, 1 minute, 1 minute 30 seconds, 2 minutes, or 4 minutes  
Note: Window Sensors have a 0 second option, while Door Sensor DOES NOT have 0 second option
-  Press OK
 
To Set Sound Type:
-  Select one of the following sound types:
-  Chime
-  None
-  Press OK
 
To Delete Sensor:
-  Console message will read: “Delete [Name of Sensor]?”
- Press OK
-  Press OK