Getting Started
Unplug your old Base and Console/Handset from power and remove the backup batteries.
Having Trouble?See Page 4, Step 3 of theQuick Setup Guide. Visit our Support Center www.lifeshield.com/customers 
 
Connect Base
  1. Plug the Base into a power source. If you have broadband internet, be sure to connect your router prior to powering on, otherwise plug the Base into power.
    • The Base will take a few minutes to boot up. Be patient.
    • Proceed to the next step when the LED on the front of the Base is solid green or flashing green/yellow.
 
Security Touchpad
  1. Plug the Touchpad into a power source
    • Keep the Security Touchpad plugged in as much as possible to avoid having the device lose power.
  2. Power on your Touchpad.
  3. Enter your Base’s WiFi settings which can be found on the bottom of your Base unit.
  4. Enter your Master Code (if prompted) and you will arrive at the main dashboard screen.
 
Entry Keypad
  1. Remove the back by lifting on the snap.
  2. Pull out the plastic battery tabs, making sure the batteries remain in place.
  3. Replace the back by inserting top tabs before snapping back into place.
  4. Plug the Power Cord into the back of the Keypad, then into a power outlet.
  5. Enter activation code: *438#700
    • The screen will read “Registration Successful” when complete.
Keychain Remote
You need to first start by deleting the old Keychain Remote(s). To do this, please follow steps below:
  1. Go to Settings → Users → Select the User from the middle menu  → Click the “Remove” button next to the word Keychain. Follow this process to remove all user Keychain Remotes if applicable.
  2. Next you can add the new Keychain Remote(s) to the appropriate user(s).
    • Go to Settings → Users → Select the User from the middle menu → Click the “Add” button next to the word Keychain. Follow this process to add all user Keychain Remotes if applicable.
                                                                                                                                                
Sensors
We recommend upgrading your entire system with the provided sensors.
For more detail on how to delete and replace your sensors please See Page 6, Quick Setup Guide
Visit our Support Center at www.lifeshield.com/customers 
 
Still Have Questions? Contact Customer Support at 877-464-7437