User-added image
HOW TO SET UP THE LIFESHIELD BASE BSC1000 – STEP-BY-STEP INSTRUCTIONS
 
Before you set up your LifeShield Base BSC1000, you’ll need to decide where you want to place it in your home. This is the only component that needs to be connected to the Internet via a standard Ethernet cable.
  1. Remove the battery cover  
  2. Insert the battery (BSC1000), then replace the table stand by sliding it back on the main body of the Base
  3. Plug the power adapter into the back of the Base. Then plug the other end of the power adapter into a wall outlet or a power strip
  4. Connect the Ethernet Cable to any available port on your router (or modem/router combo) and the back of the Base
Adding a Phone Line
A standard phone line is not required, but if you have one, it can act as a backup form of communication in case your Internet service goes down. This is an OPTIONAL step.
  1. If you have a phone line, connect one end to the Base and the other end to the wall.